Need a Design?
UFHC Drawings
UFHC SERVICES
UFHC Drawings
PremiumCAD produces detailed Underfloor Heating & Cooling (UFHC) pipe layout CAD drawings — including zone maps, heat loss calculations, pipe density and spacing schedules, and manifold layouts — for residential, commercial, and industrial radiant floor systems across all installation methods.
Zone-by-Zone Layouts
Every room individually calculated
Heat Loss Calculations
BS EN 1264 / ASHRAE compliant
Manifold Scheduling
Port assignment, zone naming, flow rates
OVERVIEW
UFHC Drawings
Underfloor heating and cooling systems require precision design drawings that go far beyond a simple pipe grid. A correctly produced UFHC drawing set shows every pipe loop's exact path, spacing, and length — verified against the room's heat loss calculation — so the installer can lay pipes accurately without ambiguity, and the building control officer can verify compliance.
Why PremiumCAD
Our team combines deep technical expertise in UFHC Drawings with real-world project experience. Every deliverable passes an independent QA review. Free revisions until you're satisfied.
PremiumCAD produces UFHC drawings to BS EN 1264 (hydronic surface embedded heating and cooling systems) and ASHRAE standards, covering all common installation methods: tacker rail and clip, wet screed, dry system (Speedheat, Wunda plates), and suspended timber joist. We produce drawings for residential apartments, commercial offices, hotels, sports facilities, and industrial buildings.
Standards & Compliance
-
ISO 9001:2015 Quality Management
-
NDA data protection on all projects
-
Delivered in DWG, PDF, and client-format
-
Unlimited revisions included
Our UFHC package is a complete installation document set — not just a layout drawing. It includes heat loss calculations, pipe length and density per zone, circuit balancing data, and a manifold port schedule so the installer has everything needed from a single package.
WHAT WE PROVIDE
Detailed UFHC Drawings Services
ZONE LAYOUT DRAWINGS
Room-by-room pipe layout showing exact coil pattern (serpentine, spiral, bifilar), spacing, and pipe run to manifold. Colour-coded by zone for installer clarity. Multiple floors produced as a coordinated set.
MANIFOLD & PORT SCHEDULES
Manifold position drawings with port assignment, zone name, zone area, flow rate, and balancing valve setting for each circuit. Multiple manifold locations produced as a coordinated set.
HEAT LOSS CALCULATIONS
Room-by-room heat loss calculations to BS EN 12831 or ASHRAE 183 — considering U-values, glazing, orientation, ventilation, and thermal bridging. Used to determine pipe spacing and output to match design load.
SYSTEM SPECIFICATION DOCUMENTATIONS
Flow temperature, return temperature, delta-T, system pressure, pump sizing, and expansion vessel sizing — all as a UFHC system specification document accompanying the drawings.
PIPE DENSITY & SPACING SCHEDULES
Zone-by-zone pipe spacing calculation (typically 100–300mm centres) based on required heating/cooling output, flow temperature, and floor finish. Includes pipe length per zone and total system pipe quantity.
BUILDER'S WORK & SCREEDING NOTES
Screed depth, expansion joint locations, perimeter insulation specification, and commissioning temperature schedule — formatted as a buildability note for the groundworker and screeder.
DELIVERABLES
What You Receive
Every engagement includes a complete, documented deliverable set — ready to submit, use, or hand over immediately.
Pipe Layout DWG
Zone-coloured AutoCAD layout per floor
Room-by-room calculations to BS EN 12831
Heat Loss Report PDF
Manifold Schedule XLS
All disciplines, with resolution log
Pipe Length Schedule
Per-zone and total pipe quantities
Screed & Builder's Work Notes
Specification for groundworker and screeder
Screed drying and commissioning schedule
Commissioning Temperature Chart
USE CASES
Who Uses This Service
Residential New Build
Full UFHC design for house or apartment block from architectural drawings
Hotels
UFHC with precise bathroom and wet room layouts in tight space constraints
Restaurants & Hospitality
UFHC avoiding floor penetrations and coordinated with kitchen drainage
Commercial Offices
Cooling-dominant UFHC design for open-plan office refurbishment
Sports & Leisure
Large-format UFHC for sports halls, changing rooms, and pool surrounds
Industrial
High-output radiant floor for workshop heating with heavy loading zones excluded
PROCESS
How we deliver your UFHC Drawings
A proven five-step workflow that keeps your project on schedule, on budget, and to specification — from first call to final deliverable.
1
2
3
4
5
Brief & Scope
We confirm your input files, output format, applicable standards, and delivery timeline before production starts.
File Intake & Review
All source files are received, catalogued, and checked for completeness. Missing information is flagged before work begins.
Production
Our certified team produces the drawing set to your standard, with an interim preview issued for your review before final completion.
QA Review
An independent senior reviewer checks every element against your specification and the applicable technical standard.
Delivery & Support
Complete package delivered in all required formats. Free revisions for any corrections until you are fully satisfied.
